The next section shows you what you need to do to make sure you’re secure.įREQUENTLY ASKED QUESTION: Identical Looking Devices This can be a big problem, especially if you live in close quarters with your neighbors, as in an apartment building. That’s because the Powerline signal could possibly “leak” out of your house via the electrical lines you share with the rest of the neighborhood ( Section 4.4). Not too hard, eh?Īlthough your computers are on the Internet at this point, the data moving around your network isn’t safe from nosy neighbors. Connect the appropriate cable (USB or Ethernet) between the Powerline adapter and either the computer’s USB or Ethernet port.Īt this point, all of your computers should be able to get to the Internet. In each room where there’s a computer, plug a Powerline adapter into an available electrical outlet. Plug a Powerline adapter into the wall next to each computer and then connect the adapter to the computer. Make sure both ends of the cable click into place to ensure a good connection. Plug one end of an Ethernet cable into the Ethernet port on the Powerline adapter and the other end into a free Ethernet port on the router. Try to use an outlet close to the router to keep the amount of cables snaking through the room to a minimum.Ĭonnect the Powerline adapter to the router. In the room with the router, plug the Ethernet Powerline adapter into the electrical outlet on wall. Remember that you need at least two Powerline adapters and that at least one of them has to be an Ethernet Powerline adapter for the connection to your router. Section 3.4.2 tells you everything you need to know to set up a WiFi router.
#Netgear poweline utility for mac problem hanging how to
Pop back to Section 2.3 for information on how to set up an Ethernet router. Make sure you’ve got an Ethernet or WiFi router up and running.
0 kommentar(er)
